Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco 7960 Telephones with 7914 Expansion Module

Can you turn off the ringer & only see the lights on the lines located on the expansion module 7914 for incoming calls without affecting the volume to the calls that come in on the lines located on the 7960?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Cisco 7960 Telephones with 7914 Expansion Module

Hi!

There is a way in ccm admin pages to turn off ringer for a selected line/phone.

You need to go to Device--->Phone page and select an ip phone. Then you need to go to the line/directory number config for this phone and under the line configuration there are 2 fileds regarding the ringer:

Ring Setting (Phone Idle) Ring Setting (Phone Active) and you can disable it.

For more info, please refer to:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_1_1/ccmcfg/b03dn.html

HTH, if it does please rate.

Have a nice day!

Teresa.

Regards, Tere. If you find this post helpful, please rate! :)
2 REPLIES
Cisco Employee

Re: Cisco 7960 Telephones with 7914 Expansion Module

Hi!

There is a way in ccm admin pages to turn off ringer for a selected line/phone.

You need to go to Device--->Phone page and select an ip phone. Then you need to go to the line/directory number config for this phone and under the line configuration there are 2 fileds regarding the ringer:

Ring Setting (Phone Idle) Ring Setting (Phone Active) and you can disable it.

For more info, please refer to:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_1_1/ccmcfg/b03dn.html

HTH, if it does please rate.

Have a nice day!

Teresa.

Regards, Tere. If you find this post helpful, please rate! :)
New Member

Re: Cisco 7960 Telephones with 7914 Expansion Module

Hi Teresa,

It worked. Thanks!!!

Have a great day.

Nicole

407
Views
0
Helpful
2
Replies