what is the difference if I used any platform from the voice bundled 2800 series as a gateway to PSTN, to that if Cisco AS5300 Series Universal Gateway was used, I mean what is the difference between these two gateways?
the as5300 is more of an 'access point/server' than a router. it has the ability to handle an array of port configurations from 2T1 to 8T1, etc. this is not a full fledged router with the routing and multiple functionality of a 2800.
the 2800 is a full fledged router that has the ability to be configured in many port combinations as well as providing full IOS routing, as well as many more features.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...