Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Cisco ATA with a text phone

Has anyone ever tried using a text phone with an ATA. Does it work?

1 REPLY
Hall of Fame Super Red

Re: Cisco ATA with a text phone

Hi Nicola,

The ATA does support "Call Display" analog phones.Have a look at the following;

Cisco ATA 186 and Cisco ATA 188 Features

----------------------------------------

The following list describes the Cisco ATA:

•Contains a single 10 BaseT RJ-45 port and two RJ-11 FXS standard analog telephone ports

•Supports G.711 alaw, G.711 mulaw, and G.723 and G.729a voice codecs

•Uses the Skinny Client Control Protocol

•Converts voice into IP data packets that are sent over a network

•Supports redial, speed dial, call forwarding, call waiting, call hold, transfer, conference, voice messaging, message-waiting indication, off-hook ringing, caller-ID, callee-ID, and call waiting caller-ID

From this doc for ccm 4.1.3

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00803edb01.html#wp1032269

Hope this helps!

Rob

Please remember to rate helpful posts.......

140
Views
3
Helpful
1
Replies
CreatePlease to create content