In order to assign the same extensions on Cisco IP Phones, the requirement is that 2nd DN with the same Extension must be in a different partition. This is the not the ideal setup, but that is what our customer wants. My question is:
Can the Cisco BAT file be used for this type of setup. I am sure I can as when I create the template in BAT File for 7960 2-line phone, for the second DN, I can choose a different partition. Just wanted to run this by a forum.
You can use the BAT to import the configuration this way.
As you mentioned, this is not he ideal configuration. You can have multiple call appearances on a single line now. Unless they plan to do some sort of special calling search space or billing tracking, I can't imagine why they would want to do it this way.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...