The initial version is limited to G.711 streams, and it certainly can take calls across the WAN. However due to the larger bandwidth requirements for G.711 streams, you would probably want to use transcoding resources. For this you can use 6608 card, 4604 card, or VG200 with DSP farm card.
I have a 2620 Router Cisco Call Manager, Unity and 7960 IP phones. The Call Manager is 3.1 from this response It seems that the Conference Manager is still stuck at G711. Is there any way other then purchasing hardware to make up for the conference manager not supporting G729?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...