Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco IP phone 7960+ATA 186

welcome All!

There is a CM of version 3.1 and ÀÒÀ 186. On CM ÀÒÀ it is registered as Í.323 the device. I call from phone Cisco 7960 on ÀÒÀ - there is no ringback. With ÀÒÀ on the phone 7960 - ringback ok. In what problem, help to understand. It is thankful in advance

  • Other Collaboration Voice and Video Subjects
3 REPLIES
Bronze

Re: Cisco IP phone 7960+ATA 186

Hi ,

there is a field on the ATA called "ConnectMode".

Make it to: "0006e011"

Good Luck

Mehmet

New Member

Re: Cisco IP phone 7960+ATA 186

Can you say, what does Bit 4 (0x10) mean ?

It's not documented.

Cisco Employee

Re: Cisco IP phone 7960+ATA 186

That will fix your problem, but I suggest running the ATA 186 and CCM with SCCP. The support just came in the 2.12 release of the ATA software. The ATA emulates a 7960 in CCM 3.0, 3.1 and is it's own device in 3.2. You must at least be running 3.0(10) or later.

Here are the release notes for the 2.12 version of software for the ATA.

http://www.cisco.com/univercd/cc/td/doc/product/voice/ata/ata186/ata186rn/186rn21m.htm

Thank you,

-Mckee

133
Views
0
Helpful
3
Replies
This widget could not be displayed.