Cisco Router Config with Nortel 9150 Remote Office

[DOUGLAS EVANS]

Does anyone have a sample cisco router config (3640 & 1751 w/ IP Plus Feature Pack IOS) for QOS settings, etc for use with the Nortel 9150 Remote Office VOIP product. Circuit is point-to-point T1.

Thank you !

[Chester Rieman]

You need to know what ports the voip traffic from the nortel is using and then apply LLQ for those ports to prioritize the traffic:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120t/120t7/pqcbwfq.htm

[DOUGLAS EVANS]

Thanks. I was hoping someone had an sample config for this specific application. This doc will be very helpful