Not sure exactly what you mean. Are you seeing slips on the t1 at layer one? Is that what you are wanting an explanation for or is that something I am missing. If you do the 6608 back to back and setup one side as internal and one side to network are you still seeing the same issue. This can rule out the 6608.
If you open the web interface to the port and click on the D-Channel you will see an entry for Clock Glitches. This is what I need an explaination for. I solved the problem I was having be using another port on the blade, I just need to know what this entry is telling me.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...