I'm having a problem with SIP Registrar and ephone dn. When I configure the sip-us to registrar with an external sip server, ALL of my configured ephone dn's also try to regiser with the external sip server. The impact of this is that while the sip-us registrar works, it has the effect of breaking my CUE voicemail. When one of my local 79XX ephone dn attached phones tries to call into voicemail, CUE picks up and then immediately disconnects. The SIP message debug of this event show that CUE considers the ephone dn to be comeing from the "wrong address," which is correct because it's INVITE presents itself to CUE as coming from "ephone_dn@external_sip_server.com.
I've tried to preseven the ephone dn's from regitering with the external sip server by the use of the "no-reg both" command, but this appears to only be used for preventing ephones from h.323 gatekeep registration.
If anyone can share a fix for this problem and/or need more detail, please let me know and I'll post any configurations and/or debugs.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.