Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CME 4 with 3-rd party sip endpoint

Im tring to register a sip endpoint to cme router 2821 with. When i connect a softphone like ms messenger - everithing is ok. And when i try this endpoint - i get unauthorised.

Whan using debug ccsip error i see:

*Mar 29 13:34:45.635: //-1/xxxxxxxxxxxx/SIP/Error/ccsip_reg_search_call_id_table

: No entry found in sipCallID Table

*Mar 29 13:34:45.639: //-1/xxxxxxxxxxxx/SIP/Error/sipSPI_validate_own_ip_addr: R

eqLine IP addr does not match with host IP addr

*Mar 29 13:34:45.639: //5/9ECE8EDA8006/SIP/Error/ccsip_spi_register_incoming_reg

istration: Registration Authorization failed with authorization header=

*Mar 29 13:34:45.751: //5/9ECE8EDA8006/SIP/Error/sipSPICheckFromToRequest:

Failed FROM/TO Request check - IGNORE IF HAIRPIN CALL

old_from: <sip:51000@192.168.6.91>

old_to: <sip:51000@192.168.6.91>;tag=1432C0-BAC

new_from: <sip:51000@192.168.6.91>

new_to: <sip:51000@192.168.6.91>;tag=1432C0-BAC

*Mar 29 13:34:45.751: //-1/xxxxxxxxxxxx/SIP/Error/ccsip_reg_search_call_id_table

: No entry found in sipCallID Table

*Mar 29 13:34:45.751: //-1/xxxxxxxxxxxx/SIP/Error/sipSPI_validate_own_ip_addr: R

eqLine IP addr does not match with host IP addr

*Mar 29 13:34:45.751: //6/9EE0425C8007/SIP/Error/ccsip_spi_register_incoming_reg

istration: Registration Authorization failed with authorization header=Digest us

ername="51000",realm="192.168.6.91",nonce="1A44B5AA00020513",uri="sip:192.168.6.

91",response="4a439a8ce15b30a1732312d93a2187ff",algorithm=MD5

and when using softphone:

Mar 29 13:36:00.179: //-1/xxxxxxxxxxxx/SIP/Error/ccsip_reg_search_call_id_table

: No entry found in sipCallID Table

*Mar 29 13:36:00.179: //-1/xxxxxxxxxxxx/SIP/Error/sipSPI_validate_own_ip_addr: R

eqLine IP addr does not match with host IP addr

*Mar 29 13:36:00.179: //8/CB3D13068009/SIP/Error/ccsip_spi_register_incoming_reg

istration: Registration Authorization failed with authorization header=

*Mar 29 13:36:00.203: //-1/xxxxxxxxxxxx/SIP/Error/ccsip_reg_search_call_id_table

: No entry found in sipCallID Table

*Mar 29 13:36:00.203: //-1/xxxxxxxxxxxx/SIP/Error/sipSPI_validate_own_ip_addr: R

eqLine IP addr does not match with host IP addr

*Mar 29 13:36:00.359: //-1/xxxxxxxxxxxx/SIP/Error/ccsip_reg_search_call_id_table

: No entry found in sipCallID Table

*Mar 29 13:36:00.359: //-1/xxxxxxxxxxxx/SIP/Error/sipSPI_validate_own_ip_addr: R

eqLine IP addr does not match with host IP addr

*Mar 29 13:36:00.359: //9/CB58899F800A/SIP/Error/ccsip_spi_register_incoming_reg

istration: Registration Authorization failed with authorization header=

*Mar 29 13:36:00.387: //-1/xxxxxxxxxxxx/SIP/Error/ccsip_reg_search_call_id_table

: No entry found in sipCallID Table

*Mar 29 13:36:00.387: //-1/xxxxxxxxxxxx/SIP/Error/sipSPI_validate_own_ip_addr: R

eqLine IP addr does not match with host IP addr

the config of the router:

voice register pool 1

id mac 000D.61A4.F5F9

number 1 dn 1

max registrations 48

username ZZZZZZ password ZZZZZZZ

codec g711alaw

!

voice register pool 2

id mac 0008.9B9C.F134

number 1 dn 2

max registrations 48

username ZZZZZZZ password ZZZZZZZZ

And I cant understand what is wrong. Because it should work and it does not.

5 REPLIES
New Member

Re: CME 4 with 3-rd party sip endpoint

Try Bug CSCee36665 or CSCed17347

New Member

Re: CME 4 with 3-rd party sip endpoint

Well. Bugs didn`t help... but I solwed this with the help of theit techsupport. Cisco needs something for authorisation that some vendors don`t supply. It is something conserning the authorisation header. As I see Zyxel wifi phone p2000w cant work with cme for the same reson. Hope something changes.

New Member

Re: CME 4 with 3-rd party sip endpoint

That explains why the Thomson ST 2030 doesn't work. I had the same problem.

New Member

Re: CME 4 with 3-rd party sip endpoint

hi do you mind sharing your cme configuration with me? I can't get to register my sip endpoint to cme. Thanks for your help.

New Member

Re: CME 4 with 3-rd party sip endpoint

hi just wondering if you figured this out.

i have exactly the same problem.

Using 3rd party soft phone allows calls to be sent to my ip address and ccme can pick up the call.

but the moment i want to use ccme to register with the sip server no calls are coming in.

sho sip-ua registar status shows all as connected. but still no incoming calls.

Outgoing is fine!

642
Views
0
Helpful
5
Replies