Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CME - 7961 Phone - extention doesn't show up on button 1

Hi Guys,

I am having such a weird issue with 7961 phone. I have configured 7961 phone in CME ver 4.0.3 and what happened that extention is not showing up on button 1 but from button 2-6 speed dials are showing up see the configs below:

ephone-dn 55 dual-line

no call-waiting beep

number 365

label Regional HR Admin - 365

description 487-689-3333

name Regional HR Admin

call-forward max-length 3

call-forward busy 370

call-forward noan 370 timeout 20

corlist incoming Filter5-RegionalHR

!

ephone 55

mac-address 001D.452C.5E03

speed-dial 1 91487-689-3322 label "Shawn_B_Cell"

speed-dial 2 91487-689-3222 label "Michelle_H_Cell"

speed-dial 3 487-689-3111label "VoiceMail_Brampton"

speed-dial 4 91487-689-3444 label "Payroll"

speed-dial 5 91487-689-8888 label "Home"

speed-dial 6 91487-689-7777 label "Telephone_Vendor"

speed-dial 7 91487-689-3666 label "Credit_Office"

speed-dial 8 918664544340 label "CIBC"

speed-dial 9 91487-689-3333 label "Zeller_Head_Office"

speed-dial 10 9487-689-3333 label "Z417Hamilton"

type 7961

button 1o55,58

Thanks in advance

4 REPLIES

Re: CME - 7961 Phone - extention doesn't show up on button 1

Iam not sure if this because of you are using overlay extensions. Can you try without overlay and see if it shows extension

button 1:55

New Member

Re: CME - 7961 Phone - extention doesn't show up on button 1

Thanks for your response!!!

it was working ok yesterday and was configured as a single line phone so i reconfigured it as a Dual-line ( ephone-dn xx dual-line)so that user could use transfer feature. If i see the configs in CME its there.

Thanks

Re: CME - 7961 Phone - extention doesn't show up on button 1

Ok. if you have changed it from single phone to dual-line, you have to apply again. just do

no button

button

and reset the phone, hopefully it should fix

New Member

Re: CME - 7961 Phone - extention doesn't show up on button 1

Since i don't have access to the phone physically, I reconfigured it and reset it via Telephony-services ---> reset 001D.452C.5E03 remotely but didn't get any message and still no change.

Its not even getting registered with CME.

Thanks

311
Views
0
Helpful
4
Replies