Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

CME - AA

I have the following config for AA, but it is not working:

translation-rule 1

Rule 1 ^2781090 550

call application voice ccmeaa flash:its-CISCO.2.0.1.0.tcl

call application voice ccmeaa aa-pilot 550

call application voice ccmeaa operator 200

call application voice ccmeaa language 1 en

call application voice ccmeaa set-location en 0 flash:

dial-peer voice 2 pots

application ccmeaa

destination-pattern T

incoming called-number 2781090

port 0/0:23

forward-digits all

when I dial 2781090, I do not hear the AA come on...I get re-order tone.

1 REPLY
Cisco Employee

Re: CME - AA

You need to configure the "application ccmeaa" on the dial-peer that is hit first. Meaning, if you are making a call from a local phone 1001 to 2781090, then you need to configure "application ccmeaa" under the pots dial-peer of 1001.

-N

282
Views
0
Helpful
1
Replies
CreatePlease to create content