Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CME and CUE clock

Hi All;

In CME, I configured: "ntp master" and "ntp server 192.168.1.1" which is CME LAN interface ip address. "show clock" in CME and CUE is different, although they both use same timezone. very appreciate if you solve my problem.

thanks

Alex

5 REPLIES

Re: CME and CUE clock

reload the CUE.

See if that makes a diff.

HTH

Sankar.

New Member

Re: CME and CUE clock

Hi;

I did that many times, no diff.

I did "ntp server 192.168.1.1" in CUE also. when I chose pacific time in CUE is PDT not PST. do you know why?

thanks

Cisco Employee

Re: CME and CUE clock

What CME hardware platform are you using, what IOS version is it, and what version is CUE?

What does 'show ntp status' on the CME say?

Bronze

Re: CME and CUE clock

CUE needs to be setup as an NTP client one you ensure that NTP master is fine.

Therefore, log into the cue session and configure the following:

ntp server {ip-address (of the cme)]

VERIFY : show ntp status

that should work

New Member

Re: CME and CUE clock

It reading your local computer clock on your pc. Change your webedit time setting.....

213
Views
0
Helpful
5
Replies