Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CME connected to two different service providers

Hi

I have a question concerning call manager express.

Is it possible to connect a router with two different E1 PRI from two different service providers. Additionaly there must be a possibility to distinguish between outgoing calls which must use pri 1 or pri 2.

Can the callmanager be configured that when a 0 is dialed before the phone number, it chooses a line from pri 1 and normally (without a 0) pri 2?

thanks for help

Patrik

  • Other Collaboration Voice and Video Subjects
1 REPLY
New Member

Re: CME connected to two different service providers

Yes definately you can do it with separate PRI providers in the same CME.

As far as routing call out, that is also doable when you create separate dial-peers with specific destination with preference 0

and prefernece 1. preference 0 gets the first choice and 1 gets the second.

HTH.

Jay

210
Views
0
Helpful
1
Replies