Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

CME - max phone limit 72 or 96 ?

The documentation is clearly misleading.

One document says, 2851 can support upto 72 phones on CME, while another says 96. Which one is the right info ?

http://www.cisco.com/en/US/products/ps5882/index.html --- shows as 72.

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/prod_release_note09186a008055677f.html ----- shows as 96.

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: CME - max phone limit 72 or 96 ?

"This solution is for customers with data-connectivity requirements interested in deploying a converged IP telephony solution for up to 72 IP phones and-as of Cisco IOS 12.3(11) release-for up to 96 IP phones."

http://www.cisco.com/en/US/products/ps5854/products_data_sheet0900aecd8016fa68.html

4 REPLIES
New Member

Re: CME - max phone limit 72 or 96 ?

"This solution is for customers with data-connectivity requirements interested in deploying a converged IP telephony solution for up to 72 IP phones and-as of Cisco IOS 12.3(11) release-for up to 96 IP phones."

http://www.cisco.com/en/US/products/ps5854/products_data_sheet0900aecd8016fa68.html

Re: CME - max phone limit 72 or 96 ?

Interesting. I get 76 in the CLI on my 2851 running 12-3(8)T8.

AU2851PTP#sh ver

Cisco IOS Software, 2800 Software (C2800NM-SPSERVICESK9-M), Version 12.3(8)T8, R

ELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2005 by Cisco Systems, Inc.

Compiled Wed 06-Apr-05 16:46 by yiyan

ROM: System Bootstrap, Version 12.3(8r)T7, RELEASE SOFTWARE (fc1)

AU2851PTP uptime is 18 weeks, 15 hours, 27 minutes

System returned to ROM by power-on

System restarted at 20:42:03 CDT Thu Jun 30 2005

System image file is "flash:c2800nm-spservicesk9-mz.123-8.T8.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

Cisco 2851 (revision 53.51) with 251904K/10240K bytes of memory.

Processor board ID FTX0919A0SL

2 Gigabit Ethernet interfaces

25 Serial interfaces

1 Channelized T1/PRI port

4 Voice FXO interfaces

4 Voice FXS interfaces

DRAM configuration is 64 bits wide with parity enabled.

239K bytes of non-volatile configuration memory.

125184K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x2102

AU2851PTP#

AU2851PTP#config t

AU2851PTP(config)#telephony-service

AU2851PTP(config-telephony)#max-ephone ?

<1-76> Maximum phones to support

AU2851PTP(config-telephony)#max-ephone

Re: CME - max phone limit 72 or 96 ?

Michael,

Seems like, the software programmer mixed up 72 and 96 to 76 ? LOL.

Re: CME - max phone limit 72 or 96 ?

Yeah, I guess they should've asked the forum before coding... LOL

414
Views
0
Helpful
4
Replies
CreatePlease login to create content