Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

cme one way voice problem

Hi I was playing with a cme in my school for the past few weeks and i encountered a one-way voice problem between my ip phones when i try to call from my 10.15.0.x network to 153.20.38.x network. My 10.15.0.x network is connected to 153.20.38.x using a NAT overload. Phones on both network are registered to the same cme. Till now i am still unable to figure out why hope someone can give me some pointers regarding this. Thanks =)

1 ACCEPTED SOLUTION

Accepted Solutions
Blue

Re: cme one way voice problem

please see this link for 'one-way-audio' troubleshooting:

http://www.cisco.com/en/US/tech/tk652/tk698/technologies_tech_note09186a008009484b.shtml

2 REPLIES
New Member

Re: cme one way voice problem

attached is my cme config. Thanks

Blue

Re: cme one way voice problem

please see this link for 'one-way-audio' troubleshooting:

http://www.cisco.com/en/US/tech/tk652/tk698/technologies_tech_note09186a008009484b.shtml

122
Views
0
Helpful
2
Replies