Call trans/forward do work from a VOIP phone to a mobile or PSTN phone (call goes out the router PRI to to Nortel, CME joined to Nortel PBX via PRI, Nortel has another PRI for PSTN world access)
Just can't trans/forward from a VOIP phone to a Nortel phone .... for the debugs VOIP phone would be 2147 and Nortel phone would be 2160 ... the VOIP phones on 2xxx have been moved off the Nortel PBX, and are only on the CME.
Anyone run into this problem before? not finding much on CCO or google.
I need to be able to tranfer and call forward calls from the VOIP phones to the Nortel phones ... I can tranfers/call forward calls coming into a VOIP phone to another VOIP phone, PSTN world or mobile, but can't transfer the call to a Nortel phone.
I've since added a few lines, the one u suggested and "transfer-pattern .T"
I've a VOIP phone 2158, have set that phone to call forward all to a Nortel phone 2160 ... I then try calling from the PSTN world (and another VOIP and Nortel phone) into ext 2158, but the VOIP phone 2158 will not call forward to Nortel phone 2160.
The VOIP phones can dial the Nortel phones and vice versa, but the VOIP phones just can't transfer or call forward to the Nortel phones.
Not sure what I have done wrong, be it a config error ... but it starting to wreck my head ;-)
Any help appreciated or how to go about troubleshooting this problem.
That worked, is there any other way to get it to work, without having to put the 8 digit in front of the phones on the Nortel network ... excuse my lack of knowledge here, but if CME knows where the phones are on the Nortel network, why can't it transfer or call forward to them? CME knows the internal VOIP and can transfer and call forward to them.
I won't be able to try that out until next week ... but before creating this post, I did try creating a single dial-peer for 2160 and that didn't make any difference.
I'll leave the work around in place .. but I'm confused as to why it won't work, I thought if a VOIP phone could call a Nortel phone it should be able to tranfer and call forward to it ... still a newbie to VOIP so learning as I go.
Tnxs for ur help ... if u can think of a logical reason as to why it won't work, perhaps u can let me know, as I am curious.
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...