CallManager and CME both register to one gatekeeper with different tech-prefix, and the gatekeeper itself doesn't configure any zone prefix. I can make call from CME to CallManager via the gatekeeper, but can't make call from CallManager to CME via the gatekeeper, and I got the error message "Unsolved zone prefix ..." from "debug gatekeeper main 5". How can let CallManager know the zone prefix of CME so as to make calls?
Assume Callmanager has one MGCP gateway, IP phones of CME have been setup with extension and full E.164 address.
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...