07-31-2003 11:24 AM - edited 03-13-2019 01:00 AM
Hi,
How do I go about I replaceing Cisco's logo with my Company's logo on the 7960, when it boots up.
I would liek to show company name always on the screen.
Thanks
Solved! Go to Solution.
08-01-2003 06:20 AM
Caveats: The missed caller ID and caller ID name
will not appear while the logo.xml is active.
--Download and install the Cisco IP Phones Services Software Developers Kit (SDK) on a seperate workstation.
The SDK tools will default to C:\CiscoIpServices\Tools.Have your logo ready in .gif fomat. 130 X 65 pixels maximum.
example: logo.gif convert your gif to CIP format using the gif2cip.exe tool
C:\CiscoIpServices\Tools>Gif2Cip logo.gif
logo.xml
The tool will convert logo.gif to logo.xml and look
something like the following...
00000000000000AAAAAAAAa00000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000006666666600000000000000000000
000000000000000000000000000000000000000YYY0000000000000000000000000000000000
00000000000000000000
Place the logo.xml in Call Manager
c:\InetPub\wwwroot
You must set each phone to the following... Setting
these settings in the enterprise parameters section
will
not work!
---Cisco IP Phone - External Data Locations---
Idle http:\\callmanageripaddress\logo.xml
Idle Timer (seconds) 10 seconds.
07-31-2003 12:31 PM
That would involve re-writing the phone's boot load. That splashcreen comes up before any communications, and the phone has no ability for local storage outside on the boot ROM. I don't think it can be changed.
08-01-2003 06:20 AM
Caveats: The missed caller ID and caller ID name
will not appear while the logo.xml is active.
--Download and install the Cisco IP Phones Services Software Developers Kit (SDK) on a seperate workstation.
The SDK tools will default to C:\CiscoIpServices\Tools.Have your logo ready in .gif fomat. 130 X 65 pixels maximum.
example: logo.gif convert your gif to CIP format using the gif2cip.exe tool
C:\CiscoIpServices\Tools>Gif2Cip logo.gif
logo.xml
The tool will convert logo.gif to logo.xml and look
something like the following...
00000000000000AAAAAAAAa00000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000006666666600000000000000000000
000000000000000000000000000000000000000YYY0000000000000000000000000000000000
00000000000000000000
Place the logo.xml in Call Manager
c:\InetPub\wwwroot
You must set each phone to the following... Setting
these settings in the enterprise parameters section
will
not work!
---Cisco IP Phone - External Data Locations---
Idle http:\\callmanageripaddress\logo.xml
Idle Timer (seconds) 10 seconds.
08-01-2003 06:27 AM
This is for the Idle URL image, NOT the boot load image.
The image when the phone boots is part of the boot code and not configurable by users / partners / integrators or anyone else but Cisco and I can't see them choosing to change it.
Paul
08-01-2003 01:54 PM
I can't get the redirect to work using meta refresh tags. Is the built in browser only capable of doing XML?
07-22-2013 06:08 PM
hi
what is location file, where can upload the xml file in cucm 9.0?
07-24-2013 02:29 AM
Juan carlos Arcaya Padilla wrote:
hi
what is location file, where can upload the xml file in cucm 9.0?
You are responding to a 10 years old thread. Please open new threads for new problems, inclduing all the necessary information.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: