07-31-2003 11:24 AM - edited 03-13-2019 01:00 AM
Hi,
How do I go about I replaceing Cisco's logo with my Company's logo on the 7960, when it boots up.
I would liek to show company name always on the screen.
Thanks
Solved! Go to Solution.
08-01-2003 06:20 AM
Caveats: The missed caller ID and caller ID name
will not appear while the logo.xml is active.
--Download and install the Cisco IP Phones Services Software Developers Kit (SDK) on a seperate workstation.
The SDK tools will default to C:\CiscoIpServices\Tools.Have your logo ready in .gif fomat. 130 X 65 pixels maximum.
example: logo.gif convert your gif to CIP format using the gif2cip.exe tool
C:\CiscoIpServices\Tools>Gif2Cip logo.gif
logo.xml
The tool will convert logo.gif to logo.xml and look
something like the following...
00000000000000AAAAAAAAa00000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000006666666600000000000000000000
000000000000000000000000000000000000000YYY0000000000000000000000000000000000
00000000000000000000
Place the logo.xml in Call Manager
c:\InetPub\wwwroot
You must set each phone to the following... Setting
these settings in the enterprise parameters section
will
not work!
---Cisco IP Phone - External Data Locations---
Idle http:\\callmanageripaddress\logo.xml
Idle Timer (seconds) 10 seconds.
07-31-2003 12:31 PM
That would involve re-writing the phone's boot load. That splashcreen comes up before any communications, and the phone has no ability for local storage outside on the boot ROM. I don't think it can be changed.
08-01-2003 06:20 AM
Caveats: The missed caller ID and caller ID name
will not appear while the logo.xml is active.
--Download and install the Cisco IP Phones Services Software Developers Kit (SDK) on a seperate workstation.
The SDK tools will default to C:\CiscoIpServices\Tools.Have your logo ready in .gif fomat. 130 X 65 pixels maximum.
example: logo.gif convert your gif to CIP format using the gif2cip.exe tool
C:\CiscoIpServices\Tools>Gif2Cip logo.gif
logo.xml
The tool will convert logo.gif to logo.xml and look
something like the following...
00000000000000AAAAAAAAa00000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000006666666600000000000000000000
000000000000000000000000000000000000000YYY0000000000000000000000000000000000
00000000000000000000
Place the logo.xml in Call Manager
c:\InetPub\wwwroot
You must set each phone to the following... Setting
these settings in the enterprise parameters section
will
not work!
---Cisco IP Phone - External Data Locations---
Idle http:\\callmanageripaddress\logo.xml
Idle Timer (seconds) 10 seconds.
08-01-2003 06:27 AM
This is for the Idle URL image, NOT the boot load image.
The image when the phone boots is part of the boot code and not configurable by users / partners / integrators or anyone else but Cisco and I can't see them choosing to change it.
Paul
08-01-2003 01:54 PM
I can't get the redirect to work using meta refresh tags. Is the built in browser only capable of doing XML?
07-22-2013 06:08 PM
hi
what is location file, where can upload the xml file in cucm 9.0?
07-24-2013 02:29 AM
Juan carlos Arcaya Padilla wrote:
hi
what is location file, where can upload the xml file in cucm 9.0?
You are responding to a 10 years old thread. Please open new threads for new problems, inclduing all the necessary information.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide