Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Company's logo on the 7960

Hi,

How do I go about I replaceing Cisco's logo with my Company's logo on the 7960, when it boots up.

I would liek to show company name always on the screen.

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Community Member

Re: Company's logo on the 7960

Caveats: The missed caller ID and caller ID name

will not appear while the logo.xml is active.

--Download and install the Cisco IP Phones Services Software Developers Kit (SDK) on a seperate workstation.

The SDK tools will default to C:\CiscoIpServices\Tools.Have your logo ready in .gif fomat. 130 X 65 pixels maximum.

example: logo.gif convert your gif to CIP format using the gif2cip.exe tool

C:\CiscoIpServices\Tools>Gif2Cip logo.gif

logo.xml

The tool will convert logo.gif to logo.xml and look

something like the following...

-1

-1

130

63

2

00000000000000AAAAAAAAa00000000000000000000000000000000000000000

0000000000000000000000000000000000000000000000006666666600000000000000000000

000000000000000000000000000000000000000YYY0000000000000000000000000000000000

00000000000000000000

COMPANY NAME HERE

Place the logo.xml in Call Manager

c:\InetPub\wwwroot

You must set each phone to the following... Setting

these settings in the enterprise parameters section

will

not work!

---Cisco IP Phone - External Data Locations---

Idle http:\\callmanageripaddress\logo.xml

Idle Timer (seconds) 10 seconds.

6 REPLIES
Community Member

Re: Company's logo on the 7960

That would involve re-writing the phone's boot load. That splashcreen comes up before any communications, and the phone has no ability for local storage outside on the boot ROM. I don't think it can be changed.

Community Member

Re: Company's logo on the 7960

Caveats: The missed caller ID and caller ID name

will not appear while the logo.xml is active.

--Download and install the Cisco IP Phones Services Software Developers Kit (SDK) on a seperate workstation.

The SDK tools will default to C:\CiscoIpServices\Tools.Have your logo ready in .gif fomat. 130 X 65 pixels maximum.

example: logo.gif convert your gif to CIP format using the gif2cip.exe tool

C:\CiscoIpServices\Tools>Gif2Cip logo.gif

logo.xml

The tool will convert logo.gif to logo.xml and look

something like the following...

-1

-1

130

63

2

00000000000000AAAAAAAAa00000000000000000000000000000000000000000

0000000000000000000000000000000000000000000000006666666600000000000000000000

000000000000000000000000000000000000000YYY0000000000000000000000000000000000

00000000000000000000

COMPANY NAME HERE

Place the logo.xml in Call Manager

c:\InetPub\wwwroot

You must set each phone to the following... Setting

these settings in the enterprise parameters section

will

not work!

---Cisco IP Phone - External Data Locations---

Idle http:\\callmanageripaddress\logo.xml

Idle Timer (seconds) 10 seconds.

Re: Company's logo on the 7960

This is for the Idle URL image, NOT the boot load image.

The image when the phone boots is part of the boot code and not configurable by users / partners / integrators or anyone else but Cisco and I can't see them choosing to change it.

Paul

Anonymous
N/A

Re: Company's logo on the 7960

I can't get the redirect to work using meta refresh tags. Is the built in browser only capable of doing XML?

Community Member

Re: Company's logo on the 7960

hi

what is location file, where can upload the xml file in cucm 9.0?

Hall of Fame Super Gold

Company's logo on the 7960

Juan carlos Arcaya Padilla wrote:

hi

what is location file, where can upload the xml file in cucm 9.0?

You are responding to a 10 years old thread. Please open new threads for new problems, inclduing all the necessary information.

1364
Views
5
Helpful
6
Replies
CreatePlease to create content