My customer wants to install Unity software on a Cisco recommended server (component system) but we have not received the dongle key yet so is it required to install the dongle in that server ? or we just need to register the software for activation code ? Thanks for help.<br><br>
You'll need to dongle to activate the features you purchased during installation. You can install without a key to get things flying and then run an upgrade when you get the dongle, but all things considered it's easier to wait for the dongle.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...