Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Conference Issue with one location

Hi All,

Issue which iam facing is not able to conference only with one location phones.

Details :

We have a centralised cluster for VoIP and phones from various locations communicate with each other through VoIP. Conferencing is smooth between all locations but not able to do with one particular location.

Checked the Region codec and Location B/w. Infact we are running G.711 within that region and G729 from other location. we have transcoders in the problematic locations but still we have this problem.

we are getting fast busy tone when trying to conference with that location.

Pls help...

3 REPLIES
Silver

Re: Conference Issue with one location

Try:

1. Remove the Meet-Me DN from a partition and put it in NONE Partition

OR

2. Configure a Meet-Me Range e.g 570x, 430x and so forth and the range can be put in a partition

Silver

Re: Conference Issue with one location

Have you checked the MRGL and MRG for the phones on that location? If the conference involves phones from different locations, please check that the router is reacheble (ping the phones from the router that is acting as the xcode and conf bridge).

New Member

Re: Conference Issue with one location

Hi espereir,

Sorry for the late response.

MRGs and MRGLs are fine. But when a ping is given between the XCODER and the IP phone the success rate is only 84%. Is the issue persists here.

Vignesh

142
Views
0
Helpful
3
Replies
CreatePlease login to create content