If on an incoming call through a 2620 H-323 gateway (analog FXO), I can't conference a second station (7960)with my 3.3(3) Callmanager. Using G-711 codecs. The same setup with a 1760 gateway works fine. The settings seem to be the same. Any ideas?
The call comes into the VoIP network through the gateway and is answered on a 7960 telephone. I then create a conference on the 7960 phone to a second 7960 phone. (I only have one gateway and two 7960 phones in my lab setup). I can make the call to try to create the conference, but when I press conference the second time to bridge everyone together, the outside line is dropped. The phones indicate a conference, but there are only two parties remaining.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.