Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

*** Config Snips *** Thanks in advance...

GKPR:

gatekeeper

zone local CORE lab.com

zone local REMOTE lab.com

zone local CCME lab.com

zone subnet CORE 1.1.1.1/32 enab

zone subnet REMOTE 3.1.2.254/32 enab

zone subnet CCME 10.2.2.2.32 enab

zone pref CORE ....

zone pref CCME 6...

gw-typ 1#* defa

no use-p CCME def in term

no use-p CCME def out term

interface e0/0

h323-gate voip int

**************************************************

CCME

ephones are all setup and cal recieve calls from CCM (CORE) and can call between local IP phones and FXS ports. The dial-peer looks like:

dial-peer voice 10 voip

session target ras

destin T (also tried a bunch of more explicit patters)

!

int lo0

h323-g voip int

h323-g voip h323-id CCME

h323-g voip id CORE ipad 10.1.1.1 (it works even though my GKPRs "bind" is on the LAN interface)

h323-g voip tech 1#

gateway

**************************************************

2 REPLIES
Silver

Re: *** Config Snips *** Thanks in advance...

Add a h323-gateway voip bind srcadrr x.x.x.x to the interface lo0

New Member

Re: *** Config Snips *** Thanks in advance...

Thanks, I had that on my config already. I figured it out...

Friggin CSS on the intercluster trunk.

101
Views
0
Helpful
2
Replies
CreatePlease to create content