Kept getting unable to configure default settings for a demo version of 2.46.<br>Ran configmgr.exe and get the following error message:<br>2001-09-25 15:39:34 (AvLogMgrSvr_MC,10007,diag file opened,) LOGMGR OPENDIAGFILE <br>15:39:34:234 (AvLogMgrSvr_MC,10001,-1,-1) LOGMGR INITIALIZE <br>15:39:34:235 (AvLogMgrSvr_MC,10002,-1,-1) LOGMGR RUN <br>15:39:35:484 (AvSystemConfig_MC,1098,SystemConfig,10) Failed to log onto the Doh. <br>please advise<br><br><br>
That's not a good solution, unfortunately. It'll work in the short term but a manually created profile will have a limit of around 250 users on the box. If you'll never go over that many subscribers, cool... when we programatically create a profile we pass in some special parameters that lift this MAPI restriction on the profile.
Deleting the profile and restarting the server should force the AvCsMgr service to create the message profile on the fly. Both the profile and the "Unity Messaging System " account should be created if they are found to be missing. I use this method frequently in the field if folks have touched one or the other or one goes missing etc... This is definitely the prefered method of dealing with the profile.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...