I'm new to configuring PRI's so excuse me if there is an obvious answer to my question. I recently purchased CUCM Business Edition and a 2801 router. I've configured the CM and the router and now have outbound calling working but cannot call in to any of the DID's. On the controller I did
pri-group timeslots 1-15 service mgcp
and i want to know if anyone knows if that is correct for a 15 channel partial PRI. Also if anyone has any ideas why I'd be able to make calls out but not receive calls. Any help greatly appreciated.
Here is part of the router config:
controller T1 0/1/0
pri-group timeslots 1-15,24 service mgcp
ip address 172.16.6.1 255.255.255.0
no ip address
no ip address
isdn switch-type primary-4ess
isdn incoming-voice voice
isdn bind-l3 ccm-manager
no cdp enable
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ccm-manager config server 172.16.6.2
mgcp call-agent 172.16.6.2 2427 service-type mgcp version 0.1
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...