There is no monitor button available in CallManager. This is one feature that almost every client I work with requests. You can use a shared line so a user can monitor if someone is on the phone or not, but then the user has the shared line information show up in missed calls directory etc. and they might also accidentally answer a call coming in on that line.
There isn't any Monitor button on Callmanager. You will have to use shared lines and set the "Privacy Option" to false. This way, when a call will land on one phone, on the shared line on another phone you will be able to see the remote in use icon on the phone line.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...