Configure Voice Qos over wireless WAN

[Scott Fella]

Here is my setup.

2651--bridge--bridge---2948G--bridge--bridge--2948G--bridge--bridge--2651

So there is 4 sites and wireless bridges that connects the buildings. I have Qos set up on the voice ports on the swtiches in the LAN, but I have no idea where to start with the WAN. Is there a configuration that I can put into the interface where the bridges are connected to for Qos. The problem is that from Building to building there is poor voice quality, but if someone makes a call to an extension that is within the same building the voice quality is fine.

Thanks!

[#2]

Being a L2 device, i don't think you can setup any QoS on the wireless bridges. You may have configure QoS only on the routing devices on the interfaces that connect to the WAN.

[Scott Fella]

What type of QoS are you suggesting on the router interface.