Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Hall of Fame Super Silver

Configure Voice Qos over wireless WAN

Here is my setup.

2651--bridge--bridge---2948G--bridge--bridge--2948G--bridge--bridge--2651

So there is 4 sites and wireless bridges that connects the buildings. I have Qos set up on the voice ports on the swtiches in the LAN, but I have no idea where to start with the WAN. Is there a configuration that I can put into the interface where the bridges are connected to for Qos. The problem is that from Building to building there is poor voice quality, but if someone makes a call to an extension that is within the same building the voice quality is fine.

Thanks!

-Scott
*** Please rate helpful posts ***
2 REPLIES
Anonymous
N/A

Re: Configure Voice Qos over wireless WAN

Being a L2 device, i don't think you can setup any QoS on the wireless bridges. You may have configure QoS only on the routing devices on the interfaces that connect to the WAN.

Hall of Fame Super Silver

Re: Configure Voice Qos over wireless WAN

What type of QoS are you suggesting on the router interface.

-Scott
*** Please rate helpful posts ***
267
Views
0
Helpful
2
Replies