Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Configuring CallManager to support MGCP for CISCO2651XM-V+AIM-Voice30

How to add Cisco 2651XM-V with AIM-Voice-30 and VWIC-1MFT-E1 to CallManager as a MGCP Gateway. When I choose 26xx gateway in "Installed Voice Interface Cards" section I can't find AIM-Voice-30. For example I can choose AIM-Voice-30 for 269X gateway but not for 26xx.

Second question is how to add Cisco 2651XM-V with AIM-Voice-30, VWIC-1MFT-E1 and NM-HDA-4FXS to CallManager as MGCP Gateway. This gateway will work because VWIC-1MFT-E1 is installed in VWIC slot and NM-HDA-4FXS in module slot but in "Installed Voice Interface Cards" I can only configure "Module in Slot 1".

Any suggestions

Maciej

  • Other Collaboration Voice and Video Subjects
2 REPLIES
New Member

Re: Configuring CallManager to support MGCP for CISCO2651XM-V+AI

This is a bug - fixed in 3.3(3)SR2 if I remember correctly.

I know it works in SR3 as I installed a 2650 with that configuration in December.

Regards,

Justin

Gold

Re: Configuring CallManager to support MGCP for CISCO2651XM-V+AI

The bug is CSCin53117 to be exact, and SR3 will indeed have the fix.

http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCin53117

261
Views
0
Helpful
2
Replies