Configuring Inter-digit timeout parameter

[rshanmugam]

Hi:

Could somebody advise me as how to configure the inter-digit timeout on Call Manager 3.1.3a?

thanks in anticipation,

Raj

[rickb]

The timer you are looking for is the t302 timer. You can adjust it by doing the following:

Service | Service Parameters | pick your server | CallManager Service | then look for the TimerT302_msec parameter and adjust as you see fit.

Also, please reference the post below for additional information.

Rick

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.ee8a15b

[rshanmugam]

Thanks for the help Rick.I hope this should work.

Raj