The ConfList button seems to work for ad-hoc conferences but not for Meet-Me conferences (at least in CM 4.02). I get the "Key is Not Active" error. Does anyone know if it is in 4.1 or will it be a feature out in a future CM release?
(2) I need to be able to block internal caller ID or at least display one single name and number for multiple DN's for IP phone to IP phone calls. Is their a way to do this? I'm referring to the example when when phone A calls phone B, phone B displays "From User A (XXXX)". The user has several DN's on the phone but doesn't want them known internally i.e only one DN displayed internally.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...