Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Connection lost for IP phone.

We have installed two month ago, with a serial leased line and two Cisco2600, a remote office with IP phone. The call manager in the main office. Every think working well.

Last week we change the serial connection by a new one passing throught a other builiding and a cisco3640.

"eth0 cisco2600 s0/0 - s3/0 cisco3640 s 3/1 -cisco2600 eth0"

Since we add this router everything IP is well "ping, trace ...." but we lost the IP phones we can ping it but no connection, and we have some timeout for some application.

Any suggestion well be appreciate. Many Thank's Thierry

3 REPLIES
New Member

Re: Connection lost for IP phone.

Hello Thierry, I need to clarify: When you say you can ping the IP phones, but have no connection, what do you exactly mean? Are you not able to dial out?

New Member

Re: Connection lost for IP phone.

Yes, i am not able to dial out because my phone is not able to connect to the call server. From my remote site, i can access application on my main site, ping servers and call server, but my phone is not able to connect to the call server. I am thinking about problem of TTL or MTU but i am not able to define the problem. Many thank's for any help !!!

New Member

Re: Connection lost for IP phone.

If the IP Phone is up, check the network settings. Make sure you are getting the right IP and the TFTP server IP. IF everything's correct, check the status messages (on the phone) and see what's displayed so you get a better understanding of what's going on...

234
Views
0
Helpful
3
Replies