Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Converting 7912 SIP phones to SCCP

Hi,

I am have few ip phones which are currently SIP phone and i wanna convert these phones to SCCP.

I was able to succefully convert the 7940 and 7960 to SCCP

I am unable to convert the 7912 sip phones to sccp .i need some help guys

I would appreciate if u guys can gimme a prompt response.

Cheers

Aj

5 REPLIES
Green

Re: Converting 7912 SIP phones to SCCP

The best to troubleshoot is using an sniffer trace,

How r u doing the conversion?

Make sure that you have in the tftp server the SCCP image, and then modify gkdefault.cfg file. Below is an example on what the file looks like.

>

>

> #txt

> #

> -----------------------------------------------------------------------------

> # This file "gkdefault.txt" is provided as a convenience for upgrading the

> # Cisco 7912G IP Phone with minimal effort.

> #

> # If changes are made to this file, you must run

> #

> # again to create a new profile and place it in the TFTP directory.

> #

> # If you plan to upgrade just one phone, you can copy gkdefault.cfg to

> # gk, where is the MAC address of the target phone, such

> # as gk001122334455.

> #

> # The phone will try to download gk first, then gkdefault.cfg

> # if corresponding gk is not found on the TFTP server.

> #

> -----------------------------------------------------------------------------

>

> upgradecode:3,0x601,0x0400,0x0100,0.0.0.0,69,0x030530B,CP79120101SCCP030530B.sbin

>

> # Set the GUI/Web config password to 1234; the password must NOT be 0

> # (disabled) if configuring via the phone's web interface is desired.

>

> #UIPassword:1234

>

Please refer below site for more information:

http://www.cisco.com/en/US/tech/tk652/tk701/technologies_tech_note09186a0080

094584.shtml

HTH

G

New Member

Re: Converting 7912 SIP phones to SCCP

Hi ,

can you tell me how this file can be edited . i mean which part of the file to be edited and if needed wat need to be added or replaced in this file..

please let me know

thanks

AJ

Green

Re: Converting 7912 SIP phones to SCCP

Will send u a sample config on Monday.

New Member

Re: Converting 7912 SIP phones to SCCP

appreciated ...

thanks a lot

New Member

Re: Converting 7912 SIP phones to SCCP

Hi,

Can you pleae send me the sample config .. from the gkdefault what i have its still taking the SIP load

waiting for your reply

379
Views
0
Helpful
5
Replies
CreatePlease login to create content