Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Converting 7960 from SIP to SCCP

Have I got this right - I am trying a SIP to SCCP conversion for a 7960 using the following reference

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_guide_chapter09186a008052dd88.html

The phone is presently loaded with

Application load P0S3-06-3-00

The router config is

tftp-server flash:P00307020400.loads

tftp-server flash:P00307020400.sb2

tftp-server flash:P00307020400.sbn

tftp-server flash:P00307020400.bin < -- tried it with and without the unsigned load

tftp-server flash:OS79XX.TXT

telephony-service

load 7960-7940 P00307020400

CME#more flash:OS79XX.TXT

P00307020400

It just keeps rebooting after it loads the OS79XX.TXT

TFTP: Looking for OS79XX.TXT

TFTP: Opened flash:OS79XX.TXT, fd 0, size 14 for process 60

TFTP: Finished flash:OS79XX.TXT, time 00:00:00 for process 60

.sbn11 06:03:51.615 UTC: TFTP: Looking for P00307020400

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1/2, changed state to down

%LINK-3-UPDOWN: Interface FastEthernet0/1/2, changed state to up

%DTP-5-TRUNKPORTON: Port Fa0/1/2 has become dot1q trunk

TFTP: Looking for OS79XX.TXT

TFTP: Opened flash:OS79XX.TXT, fd 0, size 14 for process 60

TFTP: Finished flash:OS79XX.TXT, time 00:00:00 for process 60

.sbn11 06:04:26.955 UTC: TFTP: Looking for P00307020400

%DTP-5-NONTRUNKPORTON: Port Fa0/1/2 has become non-trunk

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1/2, changed

thanks

1 REPLY
Blue

Re: Converting 7960 from SIP to SCCP

try to use a lowercase "p" in the filenames, ie:

tftp-server flash:p00307020400.loads

tftp-server flash:p00307020400.sb2

tftp-server flash:p00307020400.sbn

tftp-server flash:p00307020400.bin

i had similar symptoms. i noticed in debugs it's looking for "p00307020400...". i changed the filename from uppercase "P" to lowercase "p" and it worked!

also,

you've copied the P00307020400 files to the flash?

if so, attempt a new copy. perhaps something wrong with initial copy to the flash:.

178
Views
0
Helpful
1
Replies
CreatePlease login to create content