I changed the Administrator account inside unity from (Default Administrator) to (Default Subscriber) while doing testing. Unfortunately I forgot to change it back before exiting. Is there a workaround for this. Thanks<br><br><br><br>
The easiest way to get around this is to associate your NT account with the Example Administrator Exchange account (by default it has no NT account associated with it at all). After Unity resyncs (10 minutes max) you should be able to get into the SA using that account and then go fix things up.
if you've removed the Example Administrator from the system, we'll have to take a different approach but it's a bit messier... this is definitely the first thing to try.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...