cptone does not work

[admin_2]

I'm want to find solution for two problems on CISCO2600 IOS, voice functionality:

1) an CISCO IP-Plus IOS that give possibility to configure "forward-digits" on Dial-peer voice x pots and VOFR functionality;

2) an CISCO IP-Plus IOS that have realy working a cptone in italian. In all software that i have this configuration (cptone=IT) gives US tones.

IOS tested:

is-mz_120-5.t1

is-mz_120-5.xk1

is-mz_120-7.t

(_)is-mz_120-7.wk1

(_)is-mz_120-8

(_)is-mz_121-5.t6

_= this IOS, also, doesn't have VOFR implementation.

[#2]

12.0(7)T and 12.0( 8) are very old images and i would not recommend the use of it. Also 12.1(5)T6 is a deferred image and you should move away from that image.

I checked 12.1(5)T7 for you and it works just fine. Upgrade to 12.1(5)T7 or 12.2 images.

c2600-1(config-voiceport)#cp ?

locale 2 letter ISO-3166 country code

AR Argentina IN India PE Peru

AU Australia ID Indonesia PH Philippines

AT Austria IE Ireland PL Poland

BE Belgium IL Israel PT Portugal

BR Brazil IT Italy RU Russian Federation

CA Canada JP Japan SA Saudi Arabia

c2600-2(config)#dial-peer voice 234 ?

pots Telephony

voatm Voice over ATM

vofr Voice over Frame Relay

voip Voice over IP

c2600-2#sh ve

00:01:39: %SYS-5-CONFIG_I: Configured from console by consoler

Cisco Internetwork Operating System Software

IOS (tm) C2600 Software (C2600-IS-M), Version 12.1(5)T7, RELEASE SOFTWARE (fc1)

TAC Support: http://www.cisco.com/cgi-bin/ibld/view.pl?i=support