Has 12 voice channels enabled. Most of the CPU is Interrupts (Process switching).When all 12 channels are active, CPU touches 50%, when voice call reduces to 3, CPU reduces to 20%. I need to understand whether the CPU increase is for all calls or for encrypted calls, etc
My problem now is to upgrade the router for another 18 voice channels, and I told the customer it is not possible since already
CPU is touching 50% for 12 voice calls and it will be risky to upgrade the voice channels. Customer is asking me for justification.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...