Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

CUCM 6.0 BAT, UDP and EM

Hi folks,

I can't seem to find how to bulk add UDPs and susbscribe them to Extension Mobility using BAT.

Can anyone help?

Rich

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: CUCM 6.0 BAT, UDP and EM

And here's the files..

With some explanation on text based file creation..

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/bat/5_0_4/t14csvap.html#wp1195487

3 REPLIES
Silver

Re: CUCM 6.0 BAT, UDP and EM

Hi Rich,

Basically, the easiest way to do it is create an EM template from Bulk Administration > User Device Profiles > UDP Template. Then add the EM service to this template.

You can then insert the users via a specific details file (attached).

Or..

You can create an "all details" file and include the EM service to this (also attached)

Here is a link explaining it in more detail..

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/bat/5_0_4/t07udptm.html

Please rate useful posts...

Silver

Re: CUCM 6.0 BAT, UDP and EM

And here's the files..

With some explanation on text based file creation..

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/bat/5_0_4/t14csvap.html#wp1195487

New Member

Re: CUCM 6.0 BAT, UDP and EM

Cheers Tim

223
Views
0
Helpful
3
Replies
CreatePlease to create content