is the URL that points the phone to the Personal Directory when selected on the phone.
So i have applied the custom directory to a few test phones and i can now use our internal corp directory and the Personal Directory.
When selecting the PD, a user can login and out without a problem. They can set their own Fast dials and PAB entries.
Now the issue is when setup this way with the custom url, there are some issues with the PD.
What we are seeing is that people can log into the PD setup their fast dies etc, then if another person on the cluster logs into their PD, then they get the fastdials not of their own login, but the last person to login to the PD service. So When person A is logged in to the PD directory service, they are fine, however when person B logs in, they get person A's PAB and fast dials. Same with Person C.
Very strange. It is as if the Call manager doesn't know which phone belongs to which PD account.
has anyone had a similar issue like this? If not, where could i start to try and find a fix to this issue?
FYI: When i change the phones back to the 6.1.2 local default directory url, everything works fine. there are no issue like i have described above.
Didn't name=undefined make you suspicious? Did you ever look at how this looks when a phone requests the service?
When the phone makes the request to the directory selection url, it sends you a query string containing the name attribute and a value.. the value is the name of the phone (SEP123....).. so you need to read out the phone name and put it into the url you send back to the phone.
You must have skipped over it.. my previous post mentioned that the value of name is the phone from which the request is made... the phone makes a request to your service page and appends that parameter to the request. Your page needs to read it, then construct the personal directory url by once again appending that device name.
So as you can see, the CCM reads both locale and name from the phone's request, and uses them to formulate the response.
For once it takes the name parameter and appends it 1:1 to the personal directory.
And it uses the locale to get the name of both directories in the appropriate language.
So.. your custom directory page needs to do the same as the CCM does... read both parameters in the url, use the locale to send back the appropriate name for both directories, and append the phone name to the personal directory (this is needed because knowing the phone tells you which user owns it / is logged in, and hence when you try to log in, the ccm validates the login/pin against the appropriate user).
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...