Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CUCM 6.X - 7945, 65, 75

Anyone know when they plan on incorporating these phones into Call Manager for device type selection? Is there any articles on recommended selections on how these will work with CUCM 6.X now? I am most concerned about the 65 as it's colors opposed to the 61?

6 REPLIES
Hall of Fame Super Red

Re: CUCM 6.X - 7945, 65, 75

Hi Robert,

These models have been added to CCM 6.x and other versions with the following Device Pack installs. So you should be good to go :)

Cisco Unified IP Phone 7975G, 7965G and 7945G Release Notes for Firmware Release 8.3(2) (SCCP and SIP)

The SCCP version of firmware release 8.3(2) is compatible with Cisco Unified Communications Manager releases 6.0, 5.1, 4.3, 4.2 and 4.1

4.1(3)SR5

ciscocm.4-1-DevPack-55

4.2(3)SR2

ciscocm.4-2-3-DevPack-30

4.3(1)

ciscocm.4-3-1-DevPack-12

5.1(1)b

cmterm-devicepack5.1.1.3125-1

5.1(2)

cmterm-devicepack5.1.2.3101-3

6.0(1)

cmterm-devicepack6.0.1.1102-1

From this doc;

http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7975g/firmware/8_3_2/english/release/notes/75832.html

Hope this helps!

Rob

New Member

Re: CUCM 6.X - 7945, 65, 75

I downloaded and installed this on a 6.0.1.2000-3 that came in a business edition bundle. I still don't have the option to select the model 65 or 75. Do I just use the 71 and 61 model with that load?

Rob

Hall of Fame Super Silver

Re: CUCM 6.X - 7945, 65, 75

It is there with 6.0.1.2000-4. You cannot use the other phone types.

HTH,

Chris

New Member

Re: CUCM 6.X - 7945, 65, 75

I have upgraded to that version and they still don't show up in the device list, any advice?

New Member

Re: CUCM 6.X - 7945, 65, 75

The phone has the message "Registration Rejected: Error DBConfig"

New Member

Re: CUCM 6.X - 7945, 65, 75

On another note I turned on auto-registration it actually loaded the phone as a 7975 with the appropriate load. Although I still can't find anywhre in the UI within the device add page and the default load information page that makes mention of the 5 seris.

701
Views
0
Helpful
6
Replies