Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

CUCM 6.x, Licensing Warning Message

Hello,

Yestarday I noticed a curious message from the CUCM 6.x interface "System | Licensing | License File Upload".

{Note: Cisco Unified Communications Manager service should be restarted after uploading software version license file}

You know, colleagues, I always upload license file without any subsequent restart of CM service.

I mean NODE, SW_FEATURE, PHONE UNITs are applied instantly just after they are added to CUCM.

So what does this warning is talking about ?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: CUCM 6.x, Licensing Warning Message

Hi Tobivan,

You are probably seeing this recent note:

From the CUCM Documentation Updates;

Uploading a License File

The Uploading a License File section of the Cisco Unified Communications Manager Administration Guide does not instruct administrators to restart the Cisco CallManager service after uploading the license file. Administrators must restart the service for the license changes to take effect.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/6_1_3/cucm-rel_note-613.html#wp566425

Hope this helps!

Rob

1 REPLY
Hall of Fame Super Red

Re: CUCM 6.x, Licensing Warning Message

Hi Tobivan,

You are probably seeing this recent note:

From the CUCM Documentation Updates;

Uploading a License File

The Uploading a License File section of the Cisco Unified Communications Manager Administration Guide does not instruct administrators to restart the Cisco CallManager service after uploading the license file. Administrators must restart the service for the license changes to take effect.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/6_1_3/cucm-rel_note-613.html#wp566425

Hope this helps!

Rob

882
Views
0
Helpful
1
Replies
CreatePlease to create content