cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1097
Views
0
Helpful
4
Replies

CUE telnet

alex goshtaei
Level 1
Level 1

Hi All;

when I telnet to CME and then try ro connect to CUE by: "service-module service-engine 0/0 session" , I receive error message: "connection is refused by remote host" . How should I fix that problem?

Thanks

Alex

4 Replies 4

omendieta77
Level 1
Level 1

Hi,

First verify that you may be able to ping to the IP addres of the ServiceEngine.

Another option is to clear line TTY XX.

It depends, maybe the telnet session is used by someone else, or another device didn't close its session.

You will see the number of the TTY because you wil receive this message

Trying A.B.C.D, 20XX...

%Connection refused by remote host

Just clear the line TTY XX

Hope it works.

Orlando.

The command is "clear line XX"

or "clear line tty XX"

Let me know if it works!

OM.

Thanks

It was very helpful. If I connect to CUE by console, I can't connect by telnet. first I have to clear session in console then connect by telnet.

Alex

Yes, or exit the telnet session, it will close the session.

Some times we close the session Ctrl+Shift+6 X, it depends some times it doesn't close the telnet session.

Please rate the post.

THanks

OM

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: