I need to upgrade my Unity express box from version 2.1.0 to 2.2.2. I intend to use the clean installation method.
What i need to know is do i need to download only the cue-vm.2.2.2.pkg file alone? (e.g would this file contain an Italian langauge?)or do i also need to down load the cue-vm-installer and the cue-vm-lang file as well. The cisco doc is not too clear on this
In the 3rd column of the table, if it mentions "clean" installation method, then you need it (of course, you don't need all the languages, only the one you plan on using--which should match what you backed up if you plan on restoring).
If that still isn't clear, please post what the confusion is so I can make sure the document is addressed (and, of course, your question gets answered).
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...