Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

D-Channel is restarted on MGCP VGW

Hi,

I have CUCM 6.x communicating with x1 MGCP voice gateway registered with it. All works just fine.

The problem occurs only after I edit route pattern that points to RouteList which contains RouteGroup with this MGCP VGW.

CUCM says me that after editing it must restart voice gateway D-channel and performs it then.

D-channel is restarted indeed, I see log messages generated by gateway in the console.

How can I prevent CUCM to restart ISDN everytime I make changes via editing RP or adding new one ?

4 REPLIES

Re: D-Channel is restarted on MGCP VGW

In the MGCP gateway page there is a checkbox for "Inhibit Restarts"

-nick

New Member

Re: D-Channel is restarted on MGCP VGW

To Nicholas,

Thank you for help but it doesn't work. D-channel is restarted nevertheless.

To All,

Please, advice is it possible at all to prevent MGCP GW to restart its ISDN

if this gateway has the following configuration:

{

ccm-manager config server [ip}dns]

ccm-manager config

}

New Member

Re: D-Channel is restarted on MGCP VGW

Gentlemen,

Can anybody answer for my questions ?

Bronze

Re: D-Channel is restarted on MGCP VGW

I would take out the:

ccm-manager config server [ip}dns]

ccm-manager config

commands. The only thing is that now if you want to make changes, you have to make them there plus then go to the gateway in global config mode and type no mgcp and then type mgcp. That is how you will bounce the mgcp gateway after you take away those commands and it won't reset calls in progress.

206
Views
4
Helpful
4
Replies
CreatePlease login to create content