Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

D41 E pci and D41ESC

I have Unity 2.246B126. There are two 4 port Dialogic D41ESC in the system. I want to add a D41 E PCI to the system. Would this work.... <br><br>Sean Poure<br>NEC-Voice Engineering<br>Sr. Aplication Engineer<br>714 4846275<br>

Sean Poure
2 REPLIES
Anonymous
N/A

Re: D41 E pci and D41ESC

Sean,
The D41E PCI is compatable with the following boards: D/160SC-LS, D/41EPCI, D/120JCT. The D41Ds and NMS cards are the ones that don't play nicely with other types of cards.

Jami Stewart
Cisco Systems

Cisco Employee

Re: D41 E pci and D41ESC

Although Jami's list doesn't mention the D41ESC board, this shouldn't be a problem. The only thing to note is that your SC boards are connected with a PEB cable while the PCI board requires a CTBus cable. To connect the D41EPCI board to the D41ESC ISA board via the CTBus. There is an optional CTBus/SCbus adapter available from Dialogic.

139
Views
0
Helpful
2
Replies
CreatePlease to create content