<br>Is this expected....<br>I have installed 2.46B135. Befor I import mu subscriber or create any I run Dbwalker...Dbwalker comes back with error on Handler Alias=ch_EAdministrator<br>Extension=99999<br> Location Object Alias=default<br> Handler owner alias=<br> Handler message recipient alias=EAdministrator<br> Handler location object alias=default<br> After Message Action Destination Alias =goodbyech<br> Schedule=Weekdays<br> Standard greeting 'after greeting' destination Alias = set for hangup<br> Off Hours greeting 'after greeting' destination Alias = set for hangup<br> Alternate greeting 'after greeting' destination Alias = set for hangup<br> Busy greeting 'after greeting' destination Alias = set for hangup<br> Internal greeting 'after greeting' destination Alias = set for hangup<br> Error greeting 'after greeting' destination Alias =openinggreetingch<br><br><br><br>Sean Poure<br>NEC-Voice Engineering<br>Sr. Systems Engineer<br>714 4846275<br>
That's normal to see, and not really a huge deal to worry about. I think the very latest version of dbWalker might even fix it automatically.
Essentially, there's a hidden 'Error' greeting for each box that determines where a caller gets sent if they enter invalid input... you can edit this with Jeff's Bulk Edit tool but it isn't accessible from the SA. In the case of Example Admin, it's not too likely that people are going to end up in this mailbox anyway.
Actually, the error greeting is not a problem... nothing to be fixed on my side or on Unity's side. The error greeting is a normal part of the Unity architecture. Every subscriber and call handlers has one. It dictates the destination a caller is sent to if they enter an invalid value during the greeting (i.e. they enter a one key value that's not valid or enter an extension number that doesn't exist in the database).
If there was an error in the output, the line in the log is preceeded with an "(error)" string as mentioned at the top of the log, my web site and the help file. It always includes the "()" around it.
Not sure what you mean by it's telling you there's an error... I don't see one in that log.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...