Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Debug fax relay t30 call-id?

I'm trying to link debug fax relay messages to the ISDN calls that initiated them but I can't figure out what the number in parentheses is...

16744: Mar 27 15:38:19.567: 1/1:23 (1997) timestamp=4880282 fr-msg-det MPS

16745: Mar 27 15:38:20.327: 1/1:23 (2011) 4694 fr-entered=10(ms)

16746: Mar 27 15:38:21.455: 1/1:23 (1997) timestamp=4882172 fr-msg-tx MCF

There's two fax calls there, 1997 in progress & 2011 just starting. This seems to be a recent and helpful addition to debug fax relay... now, if I knew what the number meant, I'd be even happier! Thoughts?

2 REPLIES
Cisco Employee

Re: Debug fax relay t30 call-id?

That is the CCAPI call ID. If you want to correlate it to the ISDN call, you might want to get debug ISDN q931 and voice ccapi inout along with t30. This will help you choose the right call.

hope that helps.

Regards,

New Member

Re: Debug fax relay t30 call-id?

Aha! I should have thought of that... is there a way to get it linked up to the q931 with a little less output than ccapi inout? That generates a blizzard of debug msgs...

Thanks - Al

141
Views
0
Helpful
2
Replies
CreatePlease login to create content