06-03-2003 10:44 PM - edited 03-13-2019 12:10 AM
Hi @ all,
is it possible that the Definity G3r work over the Lan Board as Gateway for the CallManager 3.3(2).
If yes, how can i do that?!
cu
Chris
06-04-2003 12:07 AM
06-07-2003 09:08 PM
I've done this many of times, the biggest downfall is that the CCM doesn't provide ringback tone. Not sure why Cisco implemented it this way, but the CCM expects the local switch to provide ringback. Whereas in traditional telecom, the far-end switch provides ringback..
Chris
06-11-2003 10:52 PM
Hi,
i have configured the definity (Release 9) and the cisco callmanager like this: http://www1.avaya.com/enterprise/whitepapers/ip600cm2924.pdf !
The call from callmanager to definity works, but from definity to callmanger the call does't working. The Trunk give a fast busy.
Can this associate withe the Software Release 9 from the definity?
regards
Chris
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide